PRODUCT CENTER

PRODUCT

SOLUTIONS

Large angle belt feeder

Product introduction

DQPJ type large angle belt feeder is designed according to the full load condition. It can be fully loaded after an emergency stop. There is no slippage or shattering when starting or braking under various conditions.
The drum is a welded structure of steel pipes. The width of the drum is not less than the width of the conveyor belt plus 100 mm.
The belt conveyor is fully sealed. The shield itself has sufficient strength and rigidity for easy installation and removal, and weather and dust leakage.
The bolt tensioning device can be used to adjust the belt deviation to avoid slack and slip due to belt aging. It is equipped with a zero-speed detection switch to effectively detect the slippage, breakage and blockage of the conveyor.
Set the deviation switch and the rope switch to effectively prevent the belt from running off and can brake in an unexpected situation.

Applications: Electricity, steel, coal, chemicals, etc.
TECHNICAL PARAMETER
Adapting materials Sinter, pellets, coal, etc.
Belt width 500mm
Processing amount 15t/h
Power 5.5kw
Power 380V 50Hz
Technical features
The permissible conveying angle is large, up to 90°, thus saving land area.
The structure is simple and reliable.
Smooth operation and low noise.
The horizontal conveying section of any length can be set at the nose and the tail, and it can be connected with other equipment.
  • 冬暄测控-Large angle belt feeder
  • 冬暄测控-Large angle belt feeder
  • 冬暄测控-Large angle belt feeder
  • 冬暄测控-Large angle belt feeder
  • 冬暄测控-Large angle belt feeder
  • 冬暄测控-Large angle belt feeder
  • 冬暄测控-Large angle belt feeder
  • 冬暄测控-Large angle belt feeder
  • 冬暄测控-Large angle belt feeder
FOLLOW US
CONTACT US
021-80197211
80197212
0516-83669587

Doshine (Shanghai) Measurement & Control Technology Co.,Ltd

沪ICP备16036159号-1

Address: Room 610, No.47 Zhengyi Road, Yangpu District, Shanghai

MAIL:doshinesh@126.com